FEDERAL PACIFIC
NEF431030 - 30Amp Circuit Breaker
NEF431030 - 30Amp Circuit Breaker
Couldn't load pickup availability
NEF431030 - 30Amp Circuit Breaker
Suppose you're replacing an NEF431030 circuit breaker; getting the details right matters. This is a 30-amp, 3-pole molded-case circuit breaker with a bolt-on connection and a thermal-magnetic trip. It is a Type NEF breaker intended for use in compatible electrical equipment that requires these specific ratings and dimensions. The breaker is rated 14kA at 480VAC and 18kA at 240VAC and measures 6.19 inches high, 4.13 inches wide, and 3.38 inches deep. Those measurements, along with the mounting style and electrical ratings, are worth checking carefully when you're matching a breaker for an existing system. The NEF431030 may also be identified under the part numbers NEF433030, NEF435030, and NEF437030. That can be useful when the number on an existing breaker doesn't exactly match the number in older equipment records. For legacy electrical system maintenance, the goal is straightforward: match the breaker to the application as closely as possible. When the equipment calls for this particular NEF configuration, the NEF431030 provides the appropriate form, fit, and function. It's built to last when properly installed and used within its specified ratings.
Key Features and Benefits
- 30-amp rating for equipment designed around this amperage requirement.
- Three poles for compatible three-phase applications.
- Bolt-on mounting provides the connection style required by compatible NEF equipment.
- The thermal-magnetic trip responds to sustained overload conditions and higher fault currents.
- Molded case construction houses and protects the breaker's internal operating components.
- Rated 14kA at 480VAC and 18kA at 240VAC.
- A useful replacement option for legacy electrical equipment that requires the same breaker type, mounting arrangement, ratings, and dimensions.
- Also referenced as NEF433030, NEF435030, and NEF437030, making cross-referencing older equipment and maintenance records easier.
- Designed for lasting service when used within the correct application and ratings.
Technical Specifications
-
Part Number: NEF431030
-
Type: NEF
-
Amperage: 30A
-
Poles: 3
-
Breaker Type: Molded Case Circuit Breaker
-
Trip: Thermal-Magnetic
-
Mounting: Bolt-On
-
A.I.C. Rating: 14kA @ 480VAC; 18kA @ 240VAC
-
Height: 6.19 in.
-
Width: 4.13 in.
-
Depth: 3.38 in.
-
Ship Weight: 6.00 lbs.
-
Also Known As: NEF433030, NEF435030, NEF437030
Material Compliance and Certifications
- The available specifications for this breaker did not include material compliance, agency certifications, or listing information. Because these requirements can depend on the equipment and application, it's better to verify rather than assume.
- Check the markings on the actual breaker and confirm any required certifications, listings, or material compliance before installation. The breaker must also meet the equipment's requirements and applicable electrical codes.
Where It Works Best
- The NEF431030 is best suited for maintenance and replacement work on existing or legacy electrical equipment designed for a Type NEF bolt-on breaker. It's a good fit when the system calls for a 30A, three-pole breaker with the same mounting arrangement, dimensions, voltage, and interrupting ratings.
- One detail matters most: 30 amps alone doesn't establish compatibility. A replacement breaker must also match the equipment requirements for poles, mounting style, physical fit, voltage, interrupting capacity, and breaker type.
- If you're working from an old breaker, equipment label, or maintenance record, compare those details with the specifications above. The alternate references NEF433030, NEF435030, and NEF437030 may also help when identifying the breaker.
- When the specifications match the existing equipment, the NEF431030 provides a straightforward way to maintain the system's intended breaker configuration. Qualified electrical personnel should verify final compatibility and installation in accordance with the equipment requirements and applicable electrical codes.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Share
