KHL36100 - 100 Amp Circuit Breaker

KHL36100 - 100 Amp Circuit Breaker

When you're trying to match a breaker to equipment that's already in service, the KHL36100 provides several concrete details to work with. It's a 100-amp, 3-pole Type KHL molded case circuit breaker with a thermal-magnetic configuration, rated for 60Hz at 40°C. It also comes with line and load lugs, an important detail to confirm when comparing it with the breaker being replaced. For older and legacy installations, check the part number, KHL type, dimensions, poles, lug arrangement, and electrical ratings against the application. When those details line up, the KHL36100 can be considered for the required form, fit, and function.

Key Features and Benefits

• 100A, 3-pole configuration for equipment requiring these specific ratings.
• Type KHL molded case design with thermal-magnetic operation.
• Line and load lugs are included to allow this connection detail to be checked against the existing installation.
• Specified for 60Hz and 40°C.
• Well suited for consideration in existing and legacy equipment where the KHL36100 specifications match the required breaker.
  

Technical Specifications

• Part Number: KHL36100
  
• Breaker Type: Molded Case Circuit Breaker
  
• Type: KHL
  
• Configuration: Thermal Magnetic
  
• Amperage: 100A
  
• Poles: 3
  
• Frequency: 60Hz
  
• Temperature Rating: 40°C
  
• AIC Rating at 600VAC: 25k
  
• AIC Rating at 480VAC: 35k
  
• AIC Rating at 240VAC: 65k
  
• Lugs: Line and Load Lugs Included
  
• Width: 4.50 in.
  
• Height/Length: 8.00 in.
  
• Depth: 3.69 in.
  
• Dimensions: 4.50"W x 8.00"L x 3.69"D
  
• Approx. Shipping Weight: 10.00 lbs.
  

Material Compliance and Certifications

No specific third-party certifications or material compliance standards were included in the supplied KHL36100 specifications. Because they haven't been provided, listings or compliance with standards such as UL, RoHS, or REACH should not be assumed.

Where It Works Best

The KHL36100 makes the most sense when you're maintaining existing or legacy electrical equipment that calls for this particular Type KHL configuration. Start by confirming the 100A rating and three poles, then work through the other details.

Check the 4.50" W x 8.00 "L x 3.69 "D footprint against the breaker being replaced. Confirm the line and load lug arrangement as well. On the electrical side, make sure the application agrees with the 60Hz, 40°C specification and the appropriate interrupting rating—25 kAIC at 600VAC, 35 kAIC at 480VAC, or 65 kAIC at 240VAC.