HRGF20 - 20Amp Circuit Breaker

HRGF20 - 20Amp Circuit Breaker

Need to match an HRGF20 already installed in existing equipment? Start with the details that matter most. This breaker is rated at 20 amps at 120 VAC, has a single-pole configuration, and provides ground-fault circuit interruption and thermal-magnetic trip operation. For older equipment that calls for this particular HRGF configuration, these details make it easier to determine whether you have the correct form, fit, and function. The HRGF20 is built to last, but the final decision should always come down to matching the breaker specifications to the equipment—not simply finding another 20-amp breaker.

Key Features and Benefits

• 20-amp rating: Matches equipment requiring a 20A breaker with the other HRGF20 specifications.
• One-pole: A single-pole configuration for installations requiring this exact breaker arrangement.
• 120VAC operation: The stated voltage rating is 120VAC.
• Ground fault protection: Ground fault circuit interruption is incorporated into the breaker.
• Thermal-magnetic operation: Combines the specified thermal-magnetic trip function with ground fault interruption.
• Plug-on connection: An important detail to check when comparing the HRGF20 with the breaker and equipment already in place.
• Uses one full-size space: Helps you confirm the required breaker position before installation.
  

Technical Specifications

• Part Number: HRGF20
  
• Type: HRGF
  
• Product Type: Ground Fault Circuit Breaker
  
• Amperage: 20 A
  
• Number of Poles: 1
  
• Voltage: 120 VAC
  
• A.I.C. Rating: 10k at 120 VAC
  
• Interrupting Capacity: 10,000 A at 120 VAC
  
• Trip Operation: Thermal Magnetic
  
• Ground Fault Circuit Interruption: Yes
  
• Connection: Plug-On
  
• Temperature Rating: 40°C
  
• Space Requirement: One full-size breaker space
  
• Width: 0.75 in.
  
• Length: 4.81 in.
  
• Depth: 2.50 in.
  
• Overall Dimensions: 0.75"W x 4.81"L x 2.50"D
  
• Approximate Ship Weight: 1.75 lb.
  

Material Compliance and Certifications

The available HRGF20 specifications do not provide specific UL, CSA, RoHS, REACH, or other certification or material compliance information. Rather than make assumptions based on the breaker type, any required listing or compliance status should be checked against the product markings and applicable manufacturer documentation.

Where It Works Best

The HRGF20 is a practical form-and-function replacement candidate for compatible legacy equipment already calling for this breaker type and its specific characteristics: 20A, 1-pole, 120VAC, 10k AIC, plug-on connection, thermal-magnetic operation, and ground-fault circuit interruption. It takes up one full-size breaker space, so the physical configuration needs to match as well.