3VA4160-6ED14-0AA0 - 60 Amp Circuit Breaker

3VA4160-6ED14-0AA0  -  60 Amp Circuit Breaker

When you need dependable protection for your low-voltage systems, the Siemens 3VA4160-6ED14-0AA0 provides the confidence you need. This single-pole, 60-amp breaker is factory-equipped with a TM210 thermal-magnetic trip unit, so it’s ready to install right out of the box. With a 65 kA interrupting rating at 277 V AC, it meets the high safety demands of commercial and industrial applications. Its narrow 1-inch width and moderate height allow it to slip neatly into most panels without hogging space. Whether it’s guarding lighting circuits, back-up power lines, or motor loads, this breaker offers protection you can count on.

Key Features and Benefits

• Pre-set TM210 trip unit: No onsite adjustments needed; faster installation.
• High fault interrupt capacity: 65 kA at 277 VAC for handling severe fault currents.
• Compact dimensions: About 5.09 in tall × 1 in wide, weighing roughly 0.28 kg.
• Single-pole design: Offers circuit-level protection in tight spaces.
• Load-side lugs: Simplify wiring and speed up connection.
• Class H breaking capacity: Assures performance under stress.

Technical Specifications

• Poles: 1
• Rated Current (In): 60 A
• Interrupting Rating: 65 kA @ 277 VAC
• Trip Unit: TM210 thermal-magnetic, fixed Ir / fixed Ii
• Frame: 3VA4 (UL Frame 125)
• Dimensions:
  • Height: ~129.4 mm (5.09 in)
  • Width: ~25.4 mm (1 in)
  • Depth: ~75.1 mm
• Weight: ~0.28 kg (≈ 1 lb)
• Conductor Range: 1 × (8 AWG to 3/0) stranded
• Operating Temp: –25 °C to 70 °C; storage –40 °C to 80 °C
• IP Rating: IP40 (front)

Material Compliance and Certifications

• UL Listed: Conforms to UL 489 standards.
• RoHS-compliant: Meets lead and restricted substances rules.
• REACH notification: Includes required substance declaration (e.g., lead content) per EU regulations.
• WEEE: Subject to take-back obligations in applicable jurisdictions.

Where It Works Best

• This breaker is ideal for commercial or industrial settings where dependable 60 A protection is needed in a compact footprint. It works well for:
• Lighting and power distribution circuits
• HVAC systems and compressors
• Small motors and control panels
• Branch circuits in industrial control gear